0

020 88309788

SUBTOTAL:  £0.00
VAT:  £0.00
TOTAL:   £0.00TOTAL:  £0.00
View Basket
INC. VATEX. VAT
Fiddes Hardwax-Oil, Whiskey Finish, 1L Image 1Fiddes Hardwax-Oil, Whiskey Finish, 1L Image 2

Fiddes Hardwax-Oil, Whiskey Finish, 1L

£41.96 - per can, Inc. VAT£34.96 - per can, Ex. VAT

Buy More & Save!

Buy 2+ can for £31.63per can, Ex. VAT
Buy 2+ can for £37.96per can, Inc VAT

A blend of natural oils & waxes offering exceptional durability & resistance for internal natural wood flooring, kitchen worktops (wood) and areas subjected to a high degree of wear. Fiddes H...

Can(s):
SKU
FXOWHF1
Category
Fiddes Oils & Hardwax
Tags
Floor Finishing Products, Hardwax & Oil

  • Product Description

    A blend of natural oils & waxes offering exceptional durability & resistance for internal natural wood flooring, kitchen worktops (wood) and areas subjected to a high degree of wear.

    Fiddes Hardwax-Oil, Whiskey Finish, 1L produces a quick-drying, natural water repellent, tread-fast finish that will not peel or flake. To maintain/renovate, simply wash, buff or re-apply, following the guidelines below.

    Suitable for application onto children’s toys – EN 71-Toy Safety Certification

    Resistant to liquids: Tested in accordance with BS 3900 G5

    Resistant to wear: Tested in accordance with BS3900 E15

    Preparation

    Ensure all surfaces are clean, dry, and free from any previous finish. Sand the substrate with a fine 150-grade sanding paper or 150 grit sanding disk, removing all traces of dust.

    Application

    Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Fiddes Hard Wax Oil is formulated for application directly and does not require thinning.

    First Coat- Stir contents thoroughly before and during use, and apply in a warm, well-ventilated room. Apply THINLY using a good quality bristle or synthetic brush and lay EVENLY, following the direction of the grain. Remove any surplus material immediately with a cloth, carefully checking all areas for any excess application. Leave to dry 4-6 hours in warm, dry well-ventilated conditions, or preferably overnight.

    Second Coat- Apply as the first coat, THINLY, allowing good ventilation. Leave to dry 4-6 hours in warm, dry well-ventilated conditions, or preferably overnight. Clean applicator with White Spirit. When the surface area is completely dry, a light buff will further enhance the sheen level.

    • Ensure all areas to be coated are extremely well ventilated during and after the application has occurred.
    • Always test on a small area prior to major application.
    • Certain dense or oily substrates may only require a single application and subsequently buffed to achieve the desired finish.
    • Longer drying periods may occur during application in cold, damp or humid conditions.
    • Always apply sparingly and remove any excess product thoroughly.

    Re-Application: To renovate previous application of Fiddes Hard Wax Oil, lightly sand area with 150 grit sandpaper, and re-apply sparingly.

    Coverage: A single application will cover approximately 20-24 square meters per litre, depending on the density of the substrate.

    Packaging: 250ml - 1lt - 2.5lt - 25lt

    product barcode 5060147671483

  • Specification

    Sealant & Lacquer Specification
    Coverage20 - 24m²/L
    Component BaseOne Component
    Drying TimeApprox. 12 hours
    Application ToolsBrush, Roller or Cloth
    Pack Size1L
    ColourWhiskey

Related Products